AnchorAlert|定位监测汉化版 v1.0

软件说明：
本软件是检查远处漂流的船通过GPS定位一但超过指定的距离会声音报警.*
启动应用程序，将自动连接到预定义的GPS （见设置）.
你会看到您的纬度/经度对准画面后看到GPS定位.* 准确定位点后开始监测.

当然，你可以根据该软件来发挥它的其他作用。

软件需要签名后 才可以安装。 

AnchorAlarm checks how far your vessel has drifted from its anchor point and sounds an alarm when the value exceeds the specified distance



Internal or external Bluetooth GPS device is required.

USAGE

Start the application, that will automatically connect to the predefined GPS (see Settings). You will see your latitude/longitude on the main screen after GPS has a fix position.
Press ''Start'' to pinpoint your anchor point and start monitoring.
If distance from the anchor point and the current position exceeds the value set in Settings, sounds and shows alarms.
To stop monitoring, exit the application.

SETTINGS

Alarm distance: alarm will be sounded if distance exceeds this value. Alarm: switch alarming on or off.
Alert on low battery: if on, alerts if phone battery is low.
Alert on no GPS: if on, alerts if GPS device is lost (e.g. if GPS has been switched off).
Alarm volume: volume level of alarm sound.
Track ageing: track length displayed of main screen (in minutes).
Positioning: sets the GPS positioning to be used (Internal / Bluetooth / Assistated, etc).

DISPLAY

After monitoring has been started, the current position and the track is displayed on the screen.